Specifications
The most advanced license plate camera available. Installed at access points, the EL-ID1 captures plates of vehicles entering and exiting properties at speeds of up to 30mph, from a 15-30ft range. Built-in infrared illumination enables plate capture under any lighting condition; while intelligent saturation technology eliminates motion blur and headlight/sunlight glare for a high-contrast image.
Delivering perfect plate capture, the EL-ID1 allows the identification of front and rear license plates regardless of the weather or lighting conditions. The
EL-ID1 is also a far more cost efficient solution than other plate cameras without sacrificing quality.
| Image Sensor |
1/3" IDX B/W CCD |
| H. Resolution |
600 TVL |
| Effective Pixels |
768(H)X494(V) |
| Scanning System |
2:1 Interlaced |
| Synchronization System |
Internal |
| S/N Ratio |
Greater than 50dB (AGC Off) |
| Video output |
1.0Vp-p Composite. 75 Ohms |
| Min. Illumination |
0 Lux at F2.0 (IR On) |
| Shutter Speed |
1/1000 sec |
| Gamma correction |
Standard r=0.45 |
| Smear Effect |
0.005% |
| Power source |
24VDC / 24VAC |
| Operating current |
At 24VDC 1AMP |
| Lens |
16mm fixed omni-focus lens (multi-focusing) |
| Viewable Distance |
16ft in zero light |
| IR Spectrum |
850nm |
| Operating Temperature |
14F~122F (-10C~+50C)
-40F~122F (-40C~+50C) - with heater option |
| Measurement (mm) |
121.5 (D) X 164 (L) |
| Weight (Approx grams) |
900 |
| Humidity |
Within 90% RH |
